1. The tape should be stored in the warehouse to avoid sunlight and rain. It is forbidden to contact with acid and alkali solvents. It should be kept clean and dry. It should be one meter away from the discovery device and the room temperature should be between - 15-40 ℃.

2. The tape should be placed in rolls and not folded. If it is stored for a long time, it should be turned over once a season.

3. When unloading the conveyor belt during the Storage, transportation, use and maintenance of the belt, the crane should be easy to use, and the rigging of the beam should be used stably to avoid damage to the edges and corners.

4. The conveyor belt joint * is good, and the hot vulcanized rubber joint is used to improve the reliability and maintain the high effective strength.

5. The diameter of the conveyor roller and the diameter of the small pulley of the conveyor belt shall comply with the relevant regulations.

6. Do not make the belt snake or creep, keep the drag roller, vertical roller flexible, and moderate tension.

7. When the conveyor is equipped with baffle and cleaning device, the abrasion of the belt should be avoided.

8. Cleanliness is the basic condition for the good operation of the belt. Foreign materials will make the belt eccentric, tension difference, and even fracture